dalap SKT ALU Series, Руководство пользователя

Страница: 6 / 36

6
Possible faults and their elimination
Fault Possible cause Elimination
After being connected to power
supply, the fan does not rotate or
respond to control in any way
No power supply is connected.
Call a specialist.
There is a fault in the internal joints
of the device.
The air flow is low. The ventilation system is clogged. Clean the ventilation system.
Increased noise or vibration.
The fan is not properly attached or
is installed incorrectly. Remove the mistake during
installation.
The ventilation system is clogged. Clean the ventilation system.
EN EN
We recommend cleaning the fan every 6 months or more often if necessitated by the degree of use. Insufficient
maintenance may result in a marked decrease in the service life of the device or in a serious failure.
Maintenance should only be done by a qualified person.
- Turn off the fan and completely disconnect it from power supply.
- Take it down from the place of installation.
- Using a dry fine brush or cloth remove all dust from the fan's grille.
- Assemble the fan and re-connect it to the duct and to power supply.
CAUTION! The motor may not come into contact with water or cleaning agents during cleaning! Do not use flammable
or explosive cleaning agents.
CAUTION! Inspect the fan regularly and replace broken or worn cables, nuts and other components without delay.
Transport and storage rules
Keep the fan in the original box in a well-ventilated room at a temperature from -40 °C to +80 °C and a relative humidity
not exceeding 80%. The storage life is 2 years from the date of manufacture.
The fan may be transported in the original packaging using any means of transport on condition that appropriate
protection against weather effects and mechanical damage is provided. The goods may only be transported in a
secured position. Avoid impacts and other rough handling during loading and unloading.
Disposal
This symbol on the product or its packaging indicates that this product cannot be disposed of in municipal waste. The
product must be taken to a designated collection point. Proper disposal of this product helps protect precious natural
resources and prevent negative environmental and health impacts. See your local authority, local waste processor, or
the shop where you purchased the product for more details.
Maintenance