dalap HW 6206, Инструкция по эксплуатации

Страница: 4 / 48

3. P6 is user-defined,press “ ” two buttons select P6 model,
WEEK Press “ ”button 1
st
time,” ” lights on,means “Monday”.
HOUR Press “ ” button 2
nd
times, LED display front “00” twinkle,
press“
”
two buttons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE Press “ ” button 3
rd
times,LED display behind “00” twinkle
“
”
two buttons set the Hours from 00--59(01=1 Minute,02=2
Minute ect.)
With the “
”
light on,it means open time.
HOUR Press “ ” button 4
th
times, LED display front “00” twinkle,
press“ ” two buttons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE Press “ ” button 5
th
times,LED display behind “00” twinkle
“ ” two buttons set the Hours from 00--59(01=1 Minute,02=2
Minute ect.)
With the “
”
light on,it means close time.
The above are finised set Monday Timer.
4. Press “ ” button once more,” ” lights on,means “Tuesday”.Pls
noted that the operate with open time HOUR/MINUTE and close time
HOUR/MINUTE are all same as before Monday.
5. From Monday-Sunday are all set finished,press “
”
button on remote
control 7
th
times to set from Monday to Sunday’s temperature and
press“
”
two buttons,select the temperature which you need,the
temperature range from 10
℃
to 49
℃
.
PS: In Week timer function,when you set today’s temperature,the
thermostat function will start,the rules same as 4) THERMOSTAT
INSTRUCTIONS,pls noted.
You can set different open time ,closed time and temperature within
whole week.
6) Window Open Function
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This
function only through by Remote control.
2. Press “ ” button, the “ ” light is on.The appliance is working as
smart saving energy models.(In this function,the appliance is check and
record environment temperature in immediately.It will stop working,when
the appliance check the environment are drop
≧
3
℃
.The user should
restart the appliance with “ON/OFF” button)
3..Press “ ” button again, the “ ” light is off.Window Open Function
is closed.
7) Delay Function ( This function only through by Remote control.)
1. This function can be use should be fit two points :
1. the appliance is in the standby state.
2. before the appliance working.
This function only through by Remote control.
2. Press “
”
button light on LED display ,then press “
”
button one
time, the “Delay” light and ”I/W” light are on.press “ two buttons
set the Hours from 01--24(01=1 o’clock,24=24 o’clock...00=Closed ect.)
---------------------------------------------------------
This is open time
3. Press “
”
button again, the “Delay” light and ”II/H” light are on.
Press “ two buttons set the Hours from 01--24(01=1
o’clock,24=24 o’clock...00=Closed ect.)
---------------------------------------------------------
This is close time
PS :Press “ ” button,screen shows number will twinkle 5 seconds,you
should operate in time ,otherwise appliance will get back to standby, you
need press “ ” button to awaken the appliance and reset again all.
(This function is one-time and must be reset if the power is cut off.)
8)Child-Lock Function
1. This function only through by Remote control.When appliance are