Daktronics Tuff Sport H-2101, Руководство пользователя

Страница: 15 / 82

Mechanical Installation 9
3.3 Suspension Mounting Kit
One of several mounting options with the Tuff Sport scoreboards is a suspension lift eye
installation, which requires a special mounting kit (part # 0A-1237-0016). Contact Daktronics
about any installation that involves permanently suspending the scoreboard.
1. Secure the mounting angle with the 3/8" nut to each side of the scoreboard with the
included screws. Install the eyebolts into the nut on the mounting angle.
2. Attach suspension cables to the eyebolt using a shackle and pin (all of this equipment
is provided by others).
Notes:
1) Daktronics recommends that two cables be used at each end of the scoreboard.
2) Cables and hardware must be specified by a licensed engineer.
3) Do not attach suspension hardware to ad panels – attach to top of scoreboard.
4) This installation method must not be used to support scoreboard with message
centers and/or backlit ad panels attached.
5) The total weight of scoreboard and accessories must not exceed 500 lb (223 kg).
Similar to the eyebolts used to lift the scoreboard, the suspension eyebolts have a maximum
angle at which they can safely support the display. The ideal angle is perpendicular to the top
of the scoreboard, but this angle may extend up to 30° out to either side of the display.
Refer to
Drawing A-148644 in Appendix B for more information.
3.4 Ad Panel Mounting
Refer to Drawing A-147668 in Appendix B for typical ad panel mounting (similar to
Scoreboard & Module Mounting shown above) or Drawing A-156134 for instructions on
mounting ad panels directly to the top or bottom of a scoreboard.
3.5 Scoreboard Protective Devices
Daktronics Tuff Sport displays have been designed so that a normal basketball or volleyball
impact will not damage the LEDs or display cabinet, reducing the need for protective devices.
However, they are not designed to withstand direct impact from a hockey puck, so some
users may still wish to have additional protection from other projectiles. In these cases,
Daktronics can provide optional protective devices. Refer to the
Protective Screen
Installation Instructions (ED-5423) , available online at www.daktronics.com/manuals for
more information about installing protective devices.
Note: Scoreboard protection devices not provided by Daktronics must be approved by
Daktronics prior to installation. Failure to follow this approval procedure will void the
scoreboard warranty.