Daktronics TN-2010, Руководство пользователя

Страница: 6 / 94

1-2 Introduction
Final Assembly: component locations, part numbers, display dimensions,
and assembly/disassembly instructions.
All references to drawing numbers, appendices, figures, or other manuals are
presented in
bold typeface, as in this example: “Refer to Drawing A-114667 for the
location of the driver enclosure.” Additionally, any drawings referenced within a
particular subsection are listed at the beginning of that subsection in the following
manner:
Reference Drawing:
Shop Drawing; 16 High 2 ½" Small Matrix............ Drawing A-114667
Daktronics identifies each manual by assigning an engineering document number, or
ED number, which is located on the cover page. This manual, for example, would be
referred to as
ED-13890 .
The serial and model numbers of a Daktronics scoreboard can be found on the ID
label on the display. The label will be similar to the one shown in
Figure 2 . When
calling Daktronics Customer Service, please have this information available to
ensure that your request is serviced as quickly as possible. For future reference, note
your scoreboard model number, serial number, and installation date on the second
page of this manual.
Daktronics displays are built for long life and require little maintenance. However,
from time to time, certain display components will have to be replaced. The
Replacement Parts List in
Section 5 provides names and part numbers of
components that may require replacement because of wear, damage, or failure.
Following the Replacement Parts List is an explanation of Daktronics exchange and
replacement programs. Refer to these instructions if you must replace or repair any
display component.
1.2 Daktronics Nomenclature
To fully understand some Daktronics drawings, such as schematics, it is necessary to
know how various components are labeled in those drawings. You will find this
information useful when you are communicating with Daktronics about the product
for maintenance or troubleshooting efforts and while reading this manual.
Figure 2 : Daktronics Identification Label