Daktronics SPORTSOUND SSN-250, Руководство по установке

Страница: 26 / 36

24.25
[615,95]
55.9
[1420,9]
REV DATE: BY:
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2016 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
PROJECT:
DAKTRONICS AUDIO SYSTEMS
TITLE:
SHOP DWG; SSN-250; RIGID ATTACHMENT METHOD
DATE:
23-JUN-16
DIM UNITS:
INCHES [MILLIMETERS]
SHEET REV
SCALE:
1/25 DO NOT SCALE DRAWING 1 OF 1 00
DESIGN:
DTREML
JOB NO. FUNC - TYPE - SIZE
3394171
DRAWN:
DTREML P1756 E - 10 - B
INDEX NAME QTY
1 1199952-B 2
2 1199962-A 4
3 1199999 4
4 3060213 2
HARDWARE SPECIFICATION
PART# DESCRIPTION QTY
HC-1265
HC-1266
HC-1582
BOLT; 1/2"-13 X 4.50", G5, ZINC
BOLT; 1/2"-13 X 5.50", G5, ZINC
BOLT; 1/2"-13 X 7.00", G5, ZINC
4
HC-1095 WASHER; 1/2", FLAT, ZINC 28
HC-1152 BOLT; 1/2"-13 X 1.50", G5, ZINC 10
HC-1570 NUT; 1/2"-13, NYLON LOCK, ZINC 14
HC-1572 TEK SCREW; #12-14 X 0.75" 4
NOTES:
1. INSTALLATION SPEAKER CLUSTER SYSTEM SHALL ONLY BE
PERFORMED BY EXPERIENCED RIGGING PERSONNEL.
2. DAKTRONICS ASSUMES NO LIABILITY FOR IMPROPER INSTALLATION
OF SPEAKER SYSTEM INSTALLED BY NON-DAKTRONICS PERSONNEL.
3. OWNER IS RESPONSIBLE FOR VERIFYING THAT THE BUILDING
ROOF STRUCTURE CAN SAFELY SUPPORT THE SPEAKER CLUSTER
LOAD IN ACCORDANCE WITH ALL APPLICABLE STATE AND LOCAL
BUILDING CODES.
4. ANY ADDITIONAL EQUIPMENT/LOADS NOT SHOWN ON THIS
DRAWING MUST BE SUBMITTED AND APPROVED BY DAKTRONICS
TO DETERMINE THE BRACKETRY CAN SAFELY SUPPORT ALL
COMBINED LOADS.
5. ALL BRACKETS ARE ALUMINUM AND SURFACES ARE POWDER-
COATED EITHER BLACK OR WHITE TO MATCH SPEAKERS
DEPENDING ON CUSTOMERS SPECIFICATION.
6. ALL BOLTED CONNECTIONS SHALL CONFORM WITH THE
"TURN OF THE NUT" METHOD OF ATTACHMENT.
TOTAL WEIGHT: 230 LBS
ISOMETRIC VIEW
SIDE VIEW
FRONT VIEW
STEP 5 -
INSTALL MOUNTING CLAMPS TO BOTTOM OF TRUSS AS SHOWN.
THE (2) BOTTOM ANGLE BRACKETS SIT BACK TO BACK AND CENTER
HOLE IS USED TO PINCH THEM TOGETHER.
THERE ARE TWO SETS OF LONG 1/2" BOLTS PROVIDED FOR VARYING
SIZES OF TRUSS. TRUSS NEEDS AT LEAST A 1/2" SPACING BETWEEN
ANGLES TO SLIDE HARDWARE THROUGH.
ONCE MOUNTING ANGLES ARE INSTALLED, RAISE ASSEMBLY UP AND
ATTACH DIAGONALS ON BOTH ENDS AS SHOWN. IT MAY BE
NECESSARY TO RAISE ASSEMBLY WITHOUT COLUMN SPEAKER
ASSEMBLY FIRST. SEE DWG-1200806 FOR COLUMN SPEAKER
INSTALLATION.
PLUMB ASSEMBLY AND TEK SCREW STRAPS AS SHOWN TO EACH
SIDE OF THE DIAGONAL BRACKETS.
NOTE:
THIS MOUNTING METHOD IS USED FOR
TRUSSES THAT ARE RUNNING DOWN THE
CENTER OF THE GYM AND RUNNING PARALLEL
TO THE LENGTH OF THE COURT.
EXISTING BUILDING TRUSS
(SHOWN FOR CONCEPT)
EXISTING BUILDING TRUSS
(SHOWN FOR CONCEPT)
COLUMN SPEAKERS CAN BE
ADJUSTED TO UPPER POSITION
IF REQUIRED DUE TO HEIGHT
CLEARANCE REQUIREMENTS.
USED TO ADJUST FOR PROPER
AIMING OF MAIN COLUMN SPEAKER
0-25 DOWN.
SEE DETAIL A
COLUMN SPEAKERS AIM TOWARDS MAIN
SEATING AREAS ON EACH SIDE.
COURT COVERAGE SPEAKERS
COVER THE COURT AND ARE
TO BE AIMED APPROXIMATELY
AT THE FREE THROW LINE WITH
NO OBSTRUCTIONS.
SCALE 1/10
DETAIL A
1/2" HDWE
1/2" HDWE
SELF DRILLING
SCREWS
CONNECTION USING
A LOCKING NUT
FLAT WASHER
LOCKING NUT
STANDARD BOLT
FLAT WASHER
MATERIAL MATERIAL
1
2
2
4
3
4
4
2
Part # - DWG-03394171 Version - 00.2 Description - SHOP DWG; SSN-250; RIGID ATTACHMENT METHOD Lifecycle State - Full Production Last Modified By - rbehren Last Modified - 2016-07-15