Daktronics SPORTSOUND SSN-250, Руководство по установке, Страница: 23 / 36

24.313
24.500
54.800
55.9
REV DATE: BY:
01 02 JUL 15 REVISED MOUNTING BRACKETS TO RAISE CBT SPEAKERS DMT
02 21 JUN 16 ADJUSTED DRAWING AND MOVED SOME STEPS TO 3391990 DMT
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2016 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
PROJECT:
DAKTRONICS AUDIO SYSTEMS
TITLE:
MECH. INSTALLATION; SSN-250
DATE:
21-JUN-16
DIM UNITS:
INCHES [MILLIMETERS]
SHEET REV
SCALE:
1/10 DO NOT SCALE DRAWING 1 OF 1 02
DESIGN:
DTREML
JOB NO. FUNC - TYPE - SIZE
1200806
DRAWN:
DTREML P1756 E - 10 - B
INDEX NAME QTY
1 3038849 4
HARDWARE SPECIFICATION
PART# DESCRIPTION QTY
HC-1184 BOLT; 3/8"-16 X 1.25, G5, ZINC 12
HC-1100 WASHER; 3/8", SPLIT LOCK, ZINC 12
HC-1093 WASHER; 3/8", FLAT, ZINC 12
STEP 4:
NOTE: IF YOU HAVEN'T COMPLETED STEPS 1-3, SEE DRAWING: 3391990 AND COMPLETE THOSE STEPS FIRST.
ATTACH THE COLUMN SPEAKER ASSEMBLY TO EACH SIDE OF THE SPEAKER CLUSTER ASSEMBLY AS SHOWN.
NOTE, THIS SETUP MAY BE BEST TO PERFORM AFTER THE CLUSTER HAS BEEN INSTALLED TO THE ROOF TRUSS.
AIM THE SPEAKER COLUMNS SO THAT YOU HAVE EVEN COVERAGE FROM TOP TO BOTTOM SEATING. TURNING ON ONLY ONE SIDE
AND LEAVING THE SUBWOOFER AND COURT SPEAKERS OFF WILL AIDE IN THIS PROCESS. TYPICAL AIMING IS 10 DEGREES DOWN AND
IS A GOOD STARTING POINT.
BOTH COLUMNS SHOULD BE POSITIONED TO THE SAME DEGREE SO THEY HANG PLUMB. ADJUSTMENTS IS FROM 0-25 DOWN.
ISOMETRIC VIEW
SIDE VIEW
TOTAL WEIGHT: 220 LBS
THESE HOLES CAN BE USED IF
SPEAKER NEEDS TO BE RAISED IN
THE HIGHER POSITION FOR CLEARANCES
SUSPENSION POINTS @4. USED TO RIGIDLY ATTACH TO A TRUSS
USING A STANDARD MOUNTING HARDWARE KIT OR SUSPENSION
WITH A CABLE ASSEMBLY. DEPENDANT ON BUILDING LAYOUT.
COURT COVERAGE SPEAKERS TO
BE AIMED TO PROVIDE EVEN
COURT COVERAGE. GENERALLY AIMED
AT THE FREE POINT LINE IN A TYPICAL
GYM CONFIGURATION.
SCALE 1/15
FRONT VIEW
SIDE VIEW
SCALE 1/25
(COLUMN SPEAKERS SHOWN IN UPPER POSITION)
STANDARD BOLT
FLAT WASHER
MATERIAL
SPLIT-LOCK WASHER
CONNECTION INTO
A NUT INSERT
MATERIAL
NUT INSERT
1
4
Part # - DWG-01200806 Version - 02.2 Description - MECH. INSTALLATION; SSN-250 Lifecycle State - Full Production Last Modified By - rbehren Last Modified - 2016-07-15