Daktronics Sportsound SS-200, Руководство по установке

Страница: 26 / 36

REV: DATE: DESCRIPTION: BY:
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2019 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
PROJECT:
SPORTSOUND SYSTEMS
TITLE:
HAT BRACKET MOUNTING; SPK-CX-1001
DATE:
18-DEC-19
DIM UNITS:
INCHES [MILLIMETERS]
SHEET REV
SCALE:
1/10 DO NOT SCALE DRAWING 1 OF 1 00
DESIGN:
DOPPELT
JOB NO. FUNC - TYPE - SIZE
4561669
DRAWN:
DOPPELT P1870 F - 10 - B
0A-1756-0083
INDEX NAME QTY DESCRIPTION
1 HC-1095 6
WASHER; 1/2 FLAT, ZN PLTD, SAE
2 HC-1152 3
Bolt; 1/2-13x1 1/2 Hex Head, Plated, Grade 5 Fully Threaded
3 HC-1570 3
NUT, 1/2-13 W/ NYLON INSERT, GRADE 5 "NYLOCK"
0A-1756-0083
INDEX NAME QTY DESCRIPTION
1 HC-1276 2
WASHER; 3/8 SPLIT LOCK, 18-8 SS, MEDIUM
2 HC-1285 2
WASHER; 3/8 FLAT, 18-8 SS, COMMERCIAL
3 HC-1466 1
MACH SCR, #8-32 X 0.500, PHIL PAN HEAD, BLK OXIDE,
4 HC-1707 2
BOLT, 3/8-16 X 1.000, HEX HEAD, 18-8 SS
HAT BRACKET ATTACHMENT NOTES:
ALL 6 CONNECTIONS THROUGH HAT BRACKET ARE REQUIRED.
RECOMMENDED ATTACHMENT HARDWARE:
- CONCRETE:
3/8" SCREW-BOLT+ WITH
2.5" MINIMUM NOMINAL EMBEDMENT,
fc'=2500 psi MINUMUM CONCRETE
- CMU (GROUT FILLED)
HILTI HIT-HY270 WITH 3/8" THREADED ROD,
3-3/8" MINIMUM EMBEDMENT
- CMU (HOLLOW)
HILTI HIT-HY 270 WITH 1/2" THREADED ROD,
2" MINIMUM EMBEDMENT
- WOOD STUD WALL
3/8" LAG SCREW X 2-1/2" LONG,
2" MINIMUM THREAD PENETRATION INTO WOOD MEMBERS,
LAGS MUST PENETRATE INTO WOOD STUDS
- STEEL STUD WALL
ITW Bildex 1/4"-14X3" TEK 3 SELF-DRILLING SCREW
(FOLLOW ESR-1976 AND MANUFACTURER RECOMMENDATIONS)
MINIMUM STEEL STUD THICKNESS IS 12 GUAGE
SCREWS MUST LAND ON STEEL STUD.
REFERENCE DWG-4561929 FOR
DETAILS ON AIMING SPEAKER
3/8" HARDWARE PROVIDED WITH SPEAKER
STEP 3
SPEAKER MOUNTED BELOW HAT BRACKET
THREADED HOLES ON
RIGHT SIDE WHEN FACING
SPEAKER FRONT ONCE
INSTALLED
STEP 3
SPEAKER MOUNTED TO HAT BRACKET ON WALL
THREADED HOLES ON
RIGHT SIDE WHEN FACING
SPEAKER FRONT ONCE
INSTALLED
STEP 1
ATTACH HAT BRACKET
ATTACH HAT BRACKET
USING ALL 6 HOLES
STEP 2
ATTACH YOKE TO HAT BRACKET
USING 1/2" HARDWARE
BOLT IN ONE
OF THESE 2 HOLES
BOLT IN ONE
OF THESE 2 HOLES
BOLT IN MIDDLE
THREADED HOLES ON
RIGHT SIDE WHEN FACING
SPEAKER FRONT ONCE
INSTALLED
STEP 3
SPEAKER MOUNTED ABOVE HAT BRACKET
ATTACH SPEAKER TO YOKE
USING 3/8" HARDWARE
SCREW THREADS THROUGH
ONE OF THE 3 THREADED HOLES
IN YOKE CLOSEST LINING UP
WITH ANGLE NEEDED.
THREADED HOLES ON
RIGHT SIDE WHEN FACING
SPEAKER FRONT ONCE
INSTALLED
2
3
1
2
3
1
1
6
3
3
2
2
4
2
PPaarrtt ## -- D DW WG G--0044556611666699 VVeerrssiioonn -- 0000..11 D Deessccrriippttiioonn -- N N BB H HAATT BBR RAAC CKKEETT M MO OU UN NTTIIN NG G;; SSPPKK--C CXX--11000011 LLiiffeeccyyccllee SSttaattee -- FFuullll PPrroodduuccttiioonn LLaasstt M Mooddiiffiieedd BByy -- ddooppppeelltt LLaasstt M Mooddiiffiieedd -- 22001199--1122--1188