Daktronics Sportsound SS-200, Руководство по установке

Страница: 23 / 36

DH
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2019 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
REV
TITLE:
PROJECT:
INCHES [MILLIMETERS]
DESIGN:
SCALE:
DIM UNITS: DATE: SHEET
DO NOT SCALE DRAWING
FUNC - TYPE - SIZE
DRAWN: -
JOB NO.
-
SPORTSOUND SYSTEMS
RISER; SS-200, ELECTRICAL, PORTABLE SYSTEM
CBRANDT
8 OCT 19
P1756 F 01 D
NONE
CBRANDT 4306293
00
SPEAKER (SPK#) NOTES: 0A-1756-0074
1. SPEAKER ENCLOSURE PROVIDED BY DAKTRONICS AND
INSTALLED BY INSTALL SUBCONTRACTOR.
SPEAKER WEIGHT WITHOUT MOUNT = 55 LBS ea.
2. 30 FOOT, 12AWG, W-1745, SPEAKER CABLE WHIP
PRE-TERMINATED TO SPEAKER ENCLOSURE FOR FIELD
TERMINATION TO LOCAL JUNCTION BOX (LJB#).
3. 250 FOOT COIL OF W-1745 PROVIDED WITH EACH SPEAKER
FOR LJB# TO SJB1 CONNECTION. CUT TO LENGTH AFTER
INSTALLATION.
4. IF SPEAKER IS MOUNTED WITHIN 30' OF SPEAKER JUNCTION
BOX (SJB1), WIRE CAN BE ROUTED DIRECTLY TO SPEAKER
JUNCTION BOX, LOCAL JUNCTION BOX (LJB#) MAY NOT BE
NEEDED.
5. MOUNTING YOKE PROVIDED WITH EACH SPEAKER.
SECONDARY BRACKETS WILL BE PROVIDED BASED ON SITE
SPECIFIC NEEDS; POLE VS ROOF, WALL, OR SOFFIT
MOUNTING.
SEE DWG-04306807 FOR POLE MOUNTING DETAILS.
SEE DWG-04561669 FOR ROOF, WALL, OR SOFFIT MOUNTING
DETAILS.
6. SYSTEM MAY CONTAIN ONE (1) TO FOUR (4) SPEAKERS
LOCAL JUNCTION BOX (LJB#) NOTES: 0A-1756-0081
1. 1-GANG, LOCAL JUNCTION BOX (LJB#) PROVIDED WITH EACH
SPEAKER.
2. MOUNTED WITHIN RANGE OF PROVIDED
SPEAKER WHIP (30 FEET)
3. SEE LJB# INSTALLATION DETAILS
PORTABLE AMPLIFIER RACK NOTES: 0A-1756-0077
1. PORTABLE AMPLIFIER RACK PROVIDED BY DAKTRONICS.
RACK HAS TELESCOPING HANDLE AND WHEELS FOR EASY
TRANSPORT.
PORTABLE AMP RACK WEIGHT WITH NL8 CABLE = 51.5 LBS.
2. DO NOT POWER ON THE AMPLIFIER RACK IF THE FRONT
COVER IS INSTALLED, THIS WILL CAUSE DAMAGE TO THE
AMPLIFIER BY BLOCKING AIRFLOW.
3. DO NOT ALLOW AMPLIFIER RACK TO GET WET . STORE
INDOORS WHEN NOT IN USE.
4. ANY CONTROL SYSTEM (SSR-###) CONNECTED TO INPUT 1
OR INPUT 2 WILL BE ROUTED TO ALL 4 SPEAKER OUTPUTS.
SSR-AM IS SHOWN ON THIS DRAWING, BUT ANY SSR
CONTROL SYSTEM CAN BE USED WITH SS200 SYSTEM.
5. 30 FOOT, NL8 TO NL8, TWIST-LOCK SPEAKON CABLE
PROVIDED WITH RACK; W-4303368.
6. 25 FOOT XLR CABLE; W-1560
50 FOOT XLR CABLE; W-3471546
100 FOOT XLR CABLE; W-3471547
7. USE OPENING IN REAR OF RACK FOR CABLE STORAGE
SPEAKER JUNCTION BOX (SJB1) NOTES: EC-4276796
1. SPEAKER JUNCTION BOX, PROVIDED BY DAKTRONICS; IS
OUTDOOR RATED, IS INTENDED TO BE INSTALLED IN AN
ACCESSIBLE LOCATION
2. JUNCTION BOX MOUNTING HARDWARE PROVIDED BY
OTHERS
3. TWO GLAND NUTS PROVIDED ON BOTTOM OF BOX FOR
ROUTING FIELD INSTALLED SPEAKER WIRES INTO
ENCLOSURE AND STRAIN RELIEF - UP TO 2 CABLES PER
STRAIN RELIEF
4. FOLLOW SPEAKER JUNCTION BOX WIRING TABLE FOR
CONNECTING FIELD INSTALLED SPEAKER WIRES
5. WIRING FROM NL8 TO TB1-TB8 BY SPEAKER JUNCTION BOX
MFG.
6. USE SUPPLIED NL8 TO NL8 (W-4303368), SPEAKON CABLE
FOR CONNECTING PORTABLE AMPLIFIER RACK TO SPEAKER
JUNCTION BOX.
W-1745 DETAILS;
1 PAIR, 12 AWG, SPEAKER CABLE
OUTER DIAMETER = 0.352"
COLOR = BLACK
RATED FOR DIRECT BURIAL AND OUTDOOR USE, CONDUIT
NOT NECESSARY, IF CONDUIT IS USED SIZE ACCORDING TO
SITE CONDITIONS
SEE DD4310070 FOR SYSTEM MANUAL
SEE DWG-04275565 FOR SYSTEM SCHEMATIC
SPORTSOUND
OUTDOOR AUDIO SYSTEM
SS-200
APPROVED APPROVED AS NOTED APPROVED AS NOTED & RESUBMIT
COMPANY:
SIGNED:
TITLE: DATE:
SUBMITTAL APPROVAL
MAXIMUM WATTS
AMPERES PER LINE
SYSTEM VOLTAGE
NUMBER OF POLES
WIRES + GND
TOTAL POWER REQUIREMENTS:
CIRCUIT 1
120 2
1
1300W
10.8A
POWER NOTE:
-3' LOCKING POWER CORD INCLUDED WITH AMPLIFIER ROLLING
RACK.
-DEDICATED 20A 120VAC CIRCUIT RECOMMENDED WITH DUPLEX
OUTLET
30 FOOT SPEAKER WHIP INCLUDED
W/ SPEAKER, TYP.
W-1745, 1 PAIR, 12AWG, SPEAKER WIRE, TYP.
FIELD INSTALLED
MAX LENGTH = 250 FT PER SPEAKER (PROVIDED)
SPEAKER #1 (SPK1)
(OPTIONAL) SPEAKER #2
(SPK2)
(OPTIONAL) SPEAKER #4
(SPK4)
XLR CABLE PROVIDED WITH ONE OF THE FOLLOWING CONTROL SYSTEM OPTIONS;
SSR-AM (12 FOOT CABLE)
SSR-100 (25 FOOT CABLE)
SSR-200 (25 FOOT CABLE)
ADDITIONAL CABLE LENGTHS AVAILABLE, SEE NOTES SECTION
SPEAKER ASSEMBLY; TYP
0A-1756-0074
SPEAKER OUTPUT
PUSH
2
3
1
PUSH
2
3
1
INPUT
1
INPUT
2
POWER
REAR LAYOUT VIEW
4RU PORTABLE AMPLIFIER RACK
0A-1756-0077
22.5"
11.5"
(OPEN AREA FOR CABLE STORAGE)
SPEAKER JUNCTION BOX WIRING
NL8 PIN
NL8
COLOR
TB #
SPEAKER
WIRE
SPK WIRE
COLOR
1+ RED TB1 SPK 1 + RED
1- BLACK TB2 SPK 1 - BLACK
2+ BLUE TB3 SPK 2 + RED
2- BROWN TB4 SPK 2 - BLACK
3+ WHITE TB5 SPK 3 + RED
3- GREEN TB6 SPK 3 - BLACK
4+ YELLOW TB7 SPK 4 + RED
4- ORANGE TB8 SPK 4 - BLACK
FRONT VIEW SIDE VIEW
4.5"
SPEAKER JUNCTION BOX
(SJB1)
EC-4276769
W-4303368; 30 FOOT SPEAKON CABLE
MAXIMUM DISTANCE = 30 FEET
(OPTIONAL) SPEAKER #3
(SPK3)
8"
6"
REAR VIEW
ANNOUNCER'S
MIXER
PHONES
OUT
MIX
OUTPUT
MIC
INPUT
SETUP
SELECTOR
120 VAC
CIRCUIT
A/C
12VAC
600mA
CHASSIS
GND
LFT
OUTPUT
PAD
ON
OFF
A-2382
ANNOUNCER'S
HEADSET
A-2382
SSR-AM
ANNOUNCER'S MIXER KIT
0A-1756-0047
(LJB1)
(LJB2)
(LJB3)
(LJB4)
NL8
TB1
TB8
GLAND NUT @2
SPEAKER CABLE TERMINATION DETAIL; W-1745
0.33"
(+) RED
(-) BLK
2.0"
SHOWN WITH DOOR REMOVED
LOCAL JUNCTION
BOX; TYP
0A-1756-0081
INCLUDED WITH JUNCTION BOX
TO SPEAKER
LOCAL JUNCTION BOX (LJB#) INSTALLATION DETAILS
-ATTACH SUPPLIED METAL MOUNTING TABS TO LJB#
(EC-1166) WHERE NECESSARY, OPPOSITE CORNERS
OF BOX PREFERRED.
-USE SUPPLIED 0.5" PLASTIC PLUG TO SEAL REAR
THREADED CONDUIT CONNECTION, USE SILICONE IN
PLUG THREADS.
-INSTALL EC-1176 IN TOP AND BOTTOM OF BOX
-ROUTE SPEAKER WHIP AND FIELD INSTALLED
SPEAKER CABLE INTO JUNCTION BOX AS SHOWN.
-FOLLOW SPEAKER CABLE TERMINATION DETAIL FOR
CABLE/WIRE STRIP LENGTHS
-CONNECT WIRES AS SHOWN USING E-1184
-INSTALL BLANK FACEPLATE WITH GASKET (EC-1081)
-BOX MOUNTING HARDWARE PROVIDED BY OTHERS
TO SJB1
EC-1176
E-1184
WIRE NUTS
*USE SUPPLIED PLUG TO SEAL HOLE*
EC-1176
0.5" CABLE STRAIN RELIEF
RED
BLK
W-1745
SPEAKER CABLE
SEE (LJB#) DETIALS
EC-1166
1-GANG STEEL OUTDOOR ELECTRICAL BOX
EC-1081
1-GANG
COVER