Daktronics SPORTSOUND 2000HD, Инструкция по установке и обслуживанию

Страница: 18 / 56

12 Maintenance & Troubleshooting
3. Attaching New Speaker Mesh
When ordered through Daktronics, the mesh has a line with a series of tick marks
printed on the front (
Figure 16 ). These tick marks are used to indicate the location of
the tension clips and mandrels.
a. Place a mandrel, smooth side up, centered on the tick mark.
b. Fold the mesh around the mandrel. Ensure the groove in the mandrel is
towards the inside of the mesh (
Figure 17 ).
c. Snap a tension clip over the mandrel and mesh ( Figure 18 ). Do not try to
drive both ends of the clip down onto the mandrel and fabric at the same
time; snap one end down and then the other.
d. Continue to place a mandrel and tension clip on every tick mark.
Figure 16: Tick Marks on Mesh
Figure 17: Folding Mesh
Figure 18: Attach Tension Clip