Daktronics SPORTSOUND 2000HD, Руководство по установке

Страница: 18 / 54

Maintenance
14
d� Continue to place a mandrel and tension clip
on every tick mark.
e� Lay the mesh across the frame and snap each
clip into the tension channels ( Figure 19 ).
f� Pull on the corners of the mesh to remove any
wrinkles. When pulling on the fabric, do not pull
directly on the fabric flap or tension clip, or the
clip may pop off. When pulling on the face,
grasp the fold and pull the face into place.
g� Use the tensioning tool provided with the mesh
replacement kit (part # 0A-1340-2032) to drive
the tension clips into the tension channels
( Figure 20 ). Start with one or two clicks.
h� Work around the frame, tightening down all the tension clips until all the wrinkles
are removed and the mesh is properly taut. Do not over-tension! This may cause
damage to mesh graphics. Apply just enough tension to achieve a smooth, flat
surface.
i� Place the radius covers on the end of the mesh frame and tighten the set screws
on the radius cover.
4� Reattach Mesh Frame
Safely lift mesh frame back in place on the front of the sound cabinet and attach
with the twenty (20) 3/8" hardware sets. Ensure the frame is snug tight against the
cabinet.
Figure 19: Clips in Channels
Mesh
Tensioning Tool
Mesh
Frame
Tension Clip
1. Hook tensioning tool tip
into outside frame rail.
2. Use handle to apply
downward force on clip.
Figure 20: How to Use Tensioning Tool