Daktronics P1192, Руководство по установке, Страница: 31 / 34

THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2015 DAKTRONICS, INC.
DAKTRONICS, INC.
AV
DRAWN: DATE:
SHEET JOB NO: REV
SCOREBOARDS
HORN CARD INSTALLATION; GYRUS DRIVER
BGAUGHAN 29 MAY 15
P1192 R 03 A
1 = 5
KSCHNAB
3067686
00
P1
(DRIVER SHOWN W/O COVER)
J1
J3
J2
(TO TRUMPET HORN)
J5
DRIVER COMPONENTS INSTALLATION PROCEDURE:
1. FROM THE (0A-1192-1685 120 VAC) OR (0A-1192-0395 240 VAC), HORN INTERFACE
CARD ASSY. MOUNT (0P-1192-0399 120 VAC) OR (OP-1150-0255 240 VAC) HORN
SWITCH CARD USING HS-1042 SPACER & HC-1238 LOCK NUT.
2. FROM 0A-1192-1685, LOCATE 4 PIN (P18) TO 4 PIN (P2) HARNESS. PLUG P18 INTO
LED DRIVER J18. PLUG OTHER END P2 INTO J2 ON OP-1192-0399 HORN CARD.
3. PLUG POWER ADAPTER HARNESS 0A-1782-0299 PLUG P42 INTO JACK J42 ON
THE HARNESS LEAVING THE DIGIT DRIVER.
4. CONNECT PLUG P1 OF THE POWER HARNESS COMING FROM ADAPTER
HARNESS 0A-1782-0299 INTO JACK J1 ON THE HORN INTERFACE CARD.
5. CONNECT HORN CABLE PLUG P3 INTO JACK J3 OF THE 0P-1192-0399 AND THE
OPPOSITE END ON TO THE HORN.
P2
STEP 1
STEP 2
J42
P42
STEP 3
STEP 4
STEP 5
NOTES:
-THIS DRAWING DOES NOT DEPICT THE
ACTUAL LAYOUT OF COMPONENTS.
-THIS DRAWING EXPLAINS HOW THE HORN
COMPONENTS ARE CONNECTED TO EACH
OTHER.
GYRUS DIGIT DRIVER
WHEN CONNECTED TO
TI-2003 OR TI-2015,
CONNECT TO PLUG J5.
J42
NUT SPACER
OR