background image

Replacement Parts

7

4  Replacement Parts

Replacement Parts List

Part Description

Part Number

Logic card

0P-2036-1000

Module

0A-2068-8000 (1.9 mm)

0A-2036-8000 (2.5 mm)

Power supply

A-3769580

ProLink Router (PLR)

0A-1525-6053

Daktronics Exchange and Repair & Return Programs

To serve customers’ repair and maintenance needs, Daktronics offers both an exchange 

program and a repair & return program.

Exchange Program

Daktronics unique Exchange Program is a quick service for replacing key parts in need 

of repair. If a part requires repair or replacement, Daktronics sends the customer a 

replacement, and the customer sends the defective part to Daktronics. This decreases 

display downtime.
Before contacting Daktronics, identify these important part numbers:
Display Serial Number:  _______________________________________________________________
Display Model Number:  ______________________________________________________________
Contract Number:  ___________________________________________________________________
Installation Date:  _____________________________________________________________________
Sign Location:  _______________________________________________________________________
Daktronics Customer ID Number:  _____________________________________________________
To participate in the Exchange Program, follow these steps:

1.  Call Daktronics Customer Service.

Market Description

Customer Service Number

Schools (primary through community/junior colleges), 

religious organizations, municipal clubs, and  

community centers

877-605-1115

Universities and professional sporting events, live events 

for auditoriums, and arenas

866-343-6018

Financial institutions, petroleum, sign companies, 

gaming, and wholesale/retails establishments

866-343-3122

Department of Transportation, mass transits, airports, and 

parking facilities

800-833-3157

Содержание NPN-4100 Series












































Отзывы: