Daktronics GALAXY GT6 Series, Инструкция по установке и эксплуатации

Страница: 29 / 42

Display Troubleshooting
25
12 Display Troubleshooting
This section provides basic display information such as power and signal routing as well as
basic troubleshooting tips for common problems. For issues not addressed in this manual,
please contact Daktronics Technical Support.
Power and Signal Routing
Understanding power and signal flow through the display can help a technician
troubleshoot an issue.
Power Routing
Figure 24 shows an example of how power is routed through the display.
Note: Power routing may vary depending on display size. Refer to drawings included
with the display.
1� AC Power enters the display through the power entrance box on the back of the
display and travels to the Power Termination Panel.
2� Power is distributed to Module Power Supplies (2a), Thermostat (2b), and Fans (2c).
3� DC Power is supplied to the Controller (3) from the Controller Power Supply.
4� DC Power is supplied to the PLR (4) through a connection to the back of the display
module.
1
2a
2b
2c
3
4
P
L
R
P
L
R
P
L
R
Controller
Term
Panel
Power
Entrance
Quick
Connect
Output
Fans
Light
Sensor
Thermostat
Power Supplies (PS)
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS PS
PS PS
PS
PS PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
Q
C
Figure 24: Power Routing