Daktronics Galaxy GS6, Инструкция по установке и эксплуатации

Страница: 6 / 47

Installation Preparation
2
2 Installation Preparation
This section explains what to consider before installing a Galaxy
®
Large Matrix GS6 series
display.
Follow all guidelines and safety precautions in this manual when installing the display. Do
not modify the display or control system in any manner without the written permission of
Daktronics engineering staff.
Any unauthorized modifications nullify the display warranty.
Pre-Installation Checklist
• Ensure the display was not damaged during shipping.
• Ensure the mounting structure will provide a straight and square mounting frame for
the display.
• Ensure the support structure can carry the weight of the display and meets local and
national codes.
• Ensure proper power is available at sign structure–refer to the Shop Drawing for
display power requirements.
• Ensure the display cabinet has no holes (accidental or intentional) that will allow
water to enter the display.
• Ensure all display modules are fully latched into the display cabinet.
Structure Requirements
Support structure design depends on mounting method, installation height, display size,
and weight. Because every installation site is unique, Daktronics approves no single
procedure for mounting displays.
Things to consider prior to installation:
• The display mounting requires a continuous horizontal stringer across the back
attached to all display mounting points to provide adequate wind load support for
the cabinet.
• The structure must be able to carry the weight of the display and wind load.
•
Display structure and mounting must not obstruct airflow–refer to the Shop Drawing
for ventilation space requirements.
• The light sensor must not be obstructed for the display to function properly.
For additional questions about display mounting requirements and specifications, refer
to the display Shop Drawing or contact Daktronics Technical Support at 1-800-DAK-TRON
(325-8766).