Daktronics Galaxy AF-3400 Series, Руководство пользователя

Страница: 13 / 93

Introduction
1-3
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
can radiate radio frequency energy, and if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference. In such cases, the user will be required to correct the interference at
their own expense.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules.
1.2 Network Concepts
The concept of using LED displays as a cost effective and high impact method of
communication is rapidly growing throughout many industries and businesses. The
reasons for this growth are many, but the need for additional features and the
complexity of multiple display installations has emerged. Daktronics display systems
have been designed to meet those needs.
The common thread to most client requests is a means of programming and
controlling a group of displays from a central control point. Daktronics responded by
developing a powerful system of interconnecting and controlling displays. Great care
has been taken to design products that will satisfy a wide variety of installations.
Some of the design goals of these systems include the following:
•
Easy transfer of messages
•
The ability to tell a display or group of displays in the network which
message should run
•
The ability to determine the status of any display on the network
•
The ability to control multiple display technologies on the same network
There are six network systems available: RS232, RS422, modem, fiber, radio and
Ethernet. They differ on the type of physical connections needed, the distance
allowed and equipment required. A separate manual is provided for the type of
communication method ordered with the display. See
Section 3.7 for the
communication manual ED numbers.
Up to 240 displays can exist on one network.