background image

 

 

 

Copyright © Daktronics, Inc. SL-02374 Rev 10  02-Mar-2009     Page 1 of 2 

 

 

 

DAKTRONICS

WARRANTY AND LIMITATION OF LIABILITY 

 

This Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Daktronics with respect to the Equipment. By accepting 

delivery of the Equipment, Purchaser agrees to be bound by and accept these terms and conditions.  All defined terms within the Warranty shall have the 

same meaning and definition as provided elsewhere in the Agreement. 

 

DAKTRONICS WILL ONLY BE OBLIGATED TO HONOR THE WARRANTY SET FORTH IN THESE TERMS AND CONDITIONS UPON RECEIPT OF FULL 

PAYMENT FOR THE EQUIPMENT.   

 

1. 

Warranty Coverage 

  

A.  Daktronics warrants to the original end-user that the Equipment will be free from Defects (as defined below) in materials and      

workmanship for a period of one (1) year (the “Warranty Period”).  The warranty period shall commence on the earlier of: (i) four weeks from 

the date that the equipment leaves Daktronics’ facility; or (ii) Substantial Completion as defined herein. The warranty period shall expire on the 

first anniversary of the commencement date.   

 

“Substantial Completion” means the operational availability of the Equipment to the Purchaser in accordance with the Equipment’s 

specifications, without regard to punch-list items, or other non-substantial items which do not affect the operation of the Equipment.   

 

B.  Daktronics’ obligation under this Warranty is limited to, at Daktronics’ option, replacing or repairing, any Equipment or part thereof that is 

found by Daktronics not to conform to the Equipment’s specifications.   Unless otherwise directed by Daktronics, any defective part or 

component shall be returned to Daktronics for repair or replacement.  Daktronics may, at its option, provide on-site warranty service.  

Daktronics shall have a reasonable period of time to make such replacements or repairs and all labor associated therewith shall be performed 

during regular working hours.  Regular working hours are Monday through Friday between 8:00 a.m. and 5:00 p.m. at the location where 

labor is performed, excluding any holidays observed by either Purchaser or Daktronics.    

 

C.  Daktronics shall pay ground transportation charges for the return of any defective component of the Equipment. If returned Equipment is 

repaired or replaced under the terms of this warranty, Daktronics will prepay ground transportation charges back to Purchaser; otherwise, 

Purchaser shall pay transportation charges to return the Equipment back to the Purchaser.  All returns must be pre-approved by Daktronics 

before shipment.  Daktronics shall not be obligated to pay freight for any unapproved return.  Purchaser shall pay any upgraded or expedited 

transportation charges. 

 

D.  Any replacement parts or Equipment will be new or serviceably used, comparable in function and performance to the original part or 

Equipment, and warranted for the remainder of the Warranty Period.  Purchasing additional parts or Equipment from the Seller does not 

extend this Warranty Period. 

 

E.  Defects shall be defined as follows.  With regard to the Equipment (excepting LEDs), a “Defect” shall refer to a material variance from the 

design specifications that prohibit the Equipment from operating for its intended use.  With respect to LEDs, “Defects” are defined as LED pixels 

that cease to emit light.   The limited warranty provided by Daktronics does not impose any duty or liability upon Daktronics for partial LED 

pixel degradation.  Nor does the limited warranty provide for the replacement or installation of communication methods including but not 

limited to, wire, fiber optic cable, conduit, trenching, or for the purpose of overcoming local site interference radio equipment substitutions. 

 

THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE EQUIPMENT AND REPLACES ALL OTHER WARRANTIES OR 

CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  SPECIFICALLY, EXCEPT AS PROVIDED HEREIN, THE SELLER UNDERTAKES 

NO RESPONSIBILITY FOR THE QUALITY OF THE EQUIPMENT OR THAT THE EQUIPMENT WILL BE FIT FOR ANY PARTICULAR PURPOSE FOR 

WHICH PURCHASER MAY BE BUYING THE EQUIPMENT.  ANY IMPLIED WARRANTY IS LIMITED IN DURATION TO THE WARRANTY PERIOD.  

NO ORAL OR WRITTEN INFORMATION, OR ADVICE GIVEN BY THE COMPANY, ITS AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY 

OR IN ANY WAY INCREASE THE SCOPE OF THIS LIMITED WARRANTY. 

 

THIS LIMITED WARRANTY IS NOT TRANSFERABLE.   

 

2. 

Exclusion from Warranty Coverage 

 

 The limited warranty provided by Daktronics does not impose any duty or liability upon Daktronics for:  

A  Any damage occurring, at any time, during shipment of Equipment unless otherwise provided for in the Agreement. When returning 

Equipment to Daktronics for repair or replacement, Purchaser assumes all risk of loss or damage, and agrees to use any shipping containers 

that might be provided by Daktronics and to ship the Equipment in the manner prescribed by Daktronics;  
 
B.  Any damage caused by the unauthorized adjustment, repair or service of the Equipment by anyone other than personnel of Daktronics or 

its authorized repair agents;  
 
C.  Damage caused by the failure to provide a continuously suitable environment, including, but not limited to: (i) neglect or misuse, (ii) a 

failure or sudden surge of electrical power, (iii) improper air conditioning or humidity control, or (iv) any other cause other than ordinary use;  

 

Содержание FB-2350 Series















































































Отзывы: