Daktronics BA-515, Руководство пользователя, Страница: 40 / 208

Mechanical Installation
36
6.3 Scoreboard Mounting
There are two basic styles for mounting Daktronics single-section outdoor scoreboards.
Installation procedures are detailed later in this section. Use the following tables to determine
the mounting method required for each scoreboard:
Method 1
BA-618 BA-2022 MS-2011
BA-624 CR-2003 MS-2012
BA-1018 FB-824 SO-918
BA-2004 FB-2005 SO-2008
BA-2005 FB-2410 SO-2013
BA-2010 MS-918
BA-2014 MS-2002
BA-2017 MS-2003
BA-2019 MS-2004
Method 2
BA-515 RO-2010 TI-2019
BA-518 RO-2011 TI-2024
BA-718 TI-215
BA-2003 TI-218
BA-2023 TI-2003
CR-2002 TI-2010
MS-915 TI-2012
MS-2006 TI-2015
Mounting Method 1
Reference Drawings:
Ad Panel Mounting ................................................................................... Drawing A-52187
Display Mounting; Outdoor Sports Extrusion ......................................... Drawing A-308051
Drawing A-308051 shows the hardware used for mounting the scoreboard to the beams.
Mounting hardware includes inner and outer mounting clamps, clip angles,
1
/
2
-13 x 15"
threaded rods,
3
/
8
-16 x 2" bolts, hex nuts and split lockwashers, and
1
/
2
" square nuts, hex
nuts, and split lockwashers. Each section of the scoreboard attaches at the top and the bottom
to all the beams.
The drawing also shows top and side views of the scoreboard secured to the
beams.
Note: The threaded rods do not pass through the flanges of the beams, but instead run along
both sides of each beam.