Daktronics All Sport 5100 Скачать руководство пользователя страница 146

Страница: 146 / 149

H-10

All Sport 5100

Quick Start Reference

All Sport 5100 Quick Start Reference

Track Timing

Note:

This guide is used only with

Insert LL–2587

Startup

•

Turn the power switch “ON.”

•

At the

Resume Game? Y/N

prompt:

Press <

ENTER /YES

> to resume race where last shut off;

- or -

Press <

CLEAR/NO

> to enter a new code number (or start a new race

with the same code number).

Start

•

START

starts the timer for the selected lane. This key is used only as a

backup or test key.

Lane ON/OFF

•

Lane ON/OFF turns a lane OFF if ON, or ON if OFF. The LCD will

display the status.

Lane Status

•

LANE

> displays the status of the selected lane on the LCD.

Reset Timer

•

RESET TIMER

> resets the timer and prepares the timer for the next

race.

Home Guest 1,2,3 Score

•

HOME> <GUEST 1

<GUEST 2

<GUEST 3

sets the score for the

respective key.

Event, Heat

•

EVENT><HEAT

> are used to set the event and heat values.

Display ON/OFF

•

DISPLAY ON/OFF

turns the scoreboards OFF if ON, or ON if OFF

Edit

•

EDIT>

is used to edit the time of a lane. The time can only be edited if

the timer is not reset.

Содержание All Sport 5100






















































































































































Результаты поиска

Содержание All Sport 5100

Отзывы:

Бренды по названию

Популярные бренды

Daktronics All Sport 5100, Руководство по эксплуатации

Результаты поиска

Содержание All Sport 5100

Отзывы:

Бренды по названию

Популярные бренды