All Sport 5000 Series Console Quick Guide
DD2077845
Rev 03
01 August 2018
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 2 of 4
Start Up
1.
Plug power cord into standard wall outlet or battery pack.
2.
Connect all signal cables to their appropriate jacks, if they are
not already connected. Wireless radio systems may not require
these signal connections. Refer to scoreboard installation
manuals and/or site-specific Riser Diagrams for more information.
3.
Slide a sport insert into the sleeve over the keypad (see
Page 3
).
4.
Flip the
POWER
switch on rear of console to the
ON
position.
5.
The console will perform a self-test when it is powered on. During
the self-test, a message will display the version of the standard
software loaded in the console.
6.
When the self-test completes, a prompt displays the code
number for the last game played. This is useful when power to the
console is lost during a game.
• Press
YES
to resume the last game stored in memory.
The console is now ready for game operation.
• Press
NO
to start a new game or change sports. The console
will prompt for a new code number as shown below.
Use the number keypad to enter the new sport code, and then
press
ENTER
. Sport codes can be found on the sport-specific insert
and in the Operations Manual. Refer also to
Page 3
.
AS-5000 VX.X.X
ED-11544
V = version and revision number
ED = standard software number
PREV CODE NNNN
RESUME GAME?
NNNN = last code selected
SELECT CODE
CODE NNNN
NNNN = current code entered
Radio Settings
If the radio option is installed, the console will also prompt for the
radio settings after changing the sport code. Press
ENTER
to accept
the current settings or press
CLEAR
to modify them.
The radio settings in the console (transmitter) must match the
scoreboard (receiver) radio. By default, both are set to
Broadcast
Group 1
,
Channel 01
.
To determine the settings of a scoreboard, first power it down and
shut off any radio-equipped consoles in the area. Next, power the
scoreboard back up and watch for the radio settings. The settings will
appear as “
bX CY
” where
X
is the current broadcast group and
Y
is
the current channel:
The settings are typically displayed in the clock digits or Home and
Guest score digits, depending on the scoreboard model.
Refer to the Operations Manual for more radio settings.
RADIO SETTINGS
BCAST X CHAN YY
X = current broadcast group
YY = current radio channel
Radio Settings in Clock Digits
daktronics
PERIOD
GUEST
HOME
