7
LANGUAGE
The language in this section is for the voice announcements (total 3 voice prompt announcements),
for Communicator Low Battery, SOS call and ECI mode (access code).
WLAN SETTINGS (FOR THE WI-FI)
As explained above
PP SET UP
You may modify any of the DECT terminals (handsets or Communicators) which are registered to the
base with:
INT (internal) ring:
the internal ringing melody and volume what does internal and external mean
EXT (external) ring:
the external ringing melody and volume
Vibrating:
turning the vibration ON or OFF (only for communicator)
Audio set up:
calling party volume setup under speaker or earphone mode
NOTE
First you need to select which PP you wish to modify. Then press MENU/OK to select and confirm,
you may move with up and down and select with MENU/OK. For final confirmation use again the
MENU/OK button
TELECOM
This feature is meant for a special connection of the device to a telecom operator modem WHEN
using PSTN line only. It is recommended to select OTHERS. The device can support any telecom
operator and it is set during pre-production procedure
