14
PRIOR NUMBER
The Prior (priority) number feature allows you to preset desired numbers to be recognized by
CALLER ID. These numbers will be stored and any call from these numbers will be answered
automatically after first ring without any need to press any button!
to preset a Prior number, you will need to enter a pin code (0000) and press MENU/OK to confirm.
After selecting feature, enter the number. Press MENU/OK for confirmation.
ROOM MONITOR (ECI)
(operational in 7X next version only due to the voice prompt announcement)
By selecting the Room monitor, you will need to insert a pin code (0000) and press MENU/OK to
confirm.
Under Room monitor there are 2 options: ON and OFF
OFF mode disables the feature.
To Set the feature ON you will need to enter any 4 digits code (i.e. 1234). To delete a digit please use
the R key.
Once the room monitor is set ON and the 4 digits are inserted an icon appears on the main display
under standby mode: every call after first ring will activate an announcement to the call party
requesting to enter a 4 digits code! Once a correct 4 digits code is inserted, the line will be open to
conversation.
NOTE: If you select a 9999 as the code the unit will be open to all calls without the necessary
announcement and entering code! Therefore, please make sure that your 4 digits codes are not
9999!
Important information for the Room Monitor control:
During a room monitor call, the call party can activate or cancel several features as below:
Mute the microphone, speaker and volume by pressing digits: 4, 5 and 6!
The user cannot cancel the call, the call will end only when the call party
Handset keys are locked!
REGISTRATION
You may add / register additional handset or Communicator to the base. Please follow the below
instructions:
