Setting the Alarms
7
Press the Alarm
Button until you reach
the Alarm you wish to
set, (displayed as ch-
1, ch-2, ch-3, ch-4).
While the desired
Alarm is displayed,
press and hold the
Adjust Button until
the indicators blink.
Display
AL
AR
M
TIM
ER
VIB.
SO
UN
D
TIMER
DISPLA
Y
ALARM
ADJUST
Adjust
Press the Display Button to adjust the type of indication,
“Vibration”, “Sound” or “Off”.
Press the Adjust Button again and the minutes will start
to blink. Use the Display Button to adjust the minutes.
Press the Adjust Button again and the hours will start
to blink. Use the Display Button to adjust the hours.
The alarm setting operates in 24 Hour Mode.
Press the Adjust Button again to end. Repeat the
procedure as necessary to set the remaining alarms.
Alarm
If no buttons are pressed for one week, alarms will be
turned off (power saving mode).
If you do not perform any operation for 20 seconds,
the watch cancels the alarm setting mode automatically.
Alarm Operations
8
Press the Alarm Button
once to view Alarm 1.
First “ch-1” will display,
then the alarm time
(displayed in 24 hour
mode) and the indicator
selected for that alarm
(vibe or sound).
“OFF” will display if the
alarm is not active.
Press the Alarm Button
again to view each of the
remaining alarms.
To stop an alarm that is activating (beeping or vibrating),
press any of the four buttons on the watch.
The alarm will reactivate the next day at the set time.
To turn the Daily Alarm Off, please see “Setting the
Alarms” on page 7.
If no buttons are pressed for one week, alarms will be
turned off (power saving mode).
During LOW POWER ALERT MODE (page 3), the
alarm display will be disabled until the battery is
replaced.
Viewing the Alarms
AL
AR
M
TIM
ER
VIB.
SO
UN
D
TIMER
DISPLA
Y
ALARM
ADJUST
Alarm
Stopping an Alarm
