5
Setting the Digital Display
PLEASE NOTE:
If you synchronized
the digital seconds
when you set the
analog time (on page
3), you do not need to
adjust the seconds on
the digital display.
Press and hold the
Adjust Button until
the digital seconds
begin to blink.
AL
AR
M
TIM
ER
VIB.
SO
UN
D
TIMER
DISPLA
Y
ALARM
ADJUST
Adjust
Display
If needed
(not synchronized)
, press the
Display Button to change the seconds.
Press the Adjust Button to move to the minute
adjustment. Repeat for all steps.
The adjustment mode flows as shown on the
next page. For each step, press the Display
Button to change the time then press the
Adjust Button to move to the next step.
• Holding the Display Button during the
•
adjustment enables fast forwarding.
6
Second
Adjustment
Hour
Adjustment
Minute
Adjustment
Adjust Button
Hold for 2 Sec
Adjust Button
Calendar
Display Mode
NORMAL MODE
Digital Hidden
Date Adjustment
Month
Adjustment
Year Adjustment
12 / 24 Hour
Mode Change
Adjust Button
Adjust Button
Adjust Button
Adjust Button
Adjust Button
Adjust Button
Adjust Button
The watch cancels the setting mode automatically
if you do not perform any operation for 20 seconds.
The years between 2005 and 2099 are fully
controlled by perpetual calendar which shows
exact month and date even in a leap year.
When the second hand steps every 2 seconds,
the watch is in LOW POWER ALERT MODE.
During this mode, the digital time adjustment mode
will be disabled until the battery is replaced.
