Manual # 650373A
4. Install the VHX system into the dash. Align the four mounting holes and re-use the factory
screws to fasten the VHX gauges into the dash.
5. Re-install the gauge bezel and refer to the main manual for wiring instructions to complete the
VHX installation.
6. Stock charging systems will need an additional wiring connection at the gauge cluster connecter.
You will need to add a 300 to 500 ohm resistor between pin 25 (Brown wire) and Pin 18 (Pink/Black
wire). The provided alternator load harness can be used to achieve this.
