Dakota Digital VHX-69C-CAC, Руководство по установке

Страница: 4 / 8

Manual # 650423A
8. Using the two provided 10-
32 x 1.5”
screws and nylon shoulder washers , secure the
speedometer assembly to the housing. Start the screws into the back of the factory housing and
into the pull-block on the back of the gauge assembly. Tighten with a 1/8
” Allen wrench.
9. To install the tachometer, repeat the steps above, making sure to use the shorter screws and
plastic washers. The tachometer uses two 10-
32 x 1” screws
and two flat nylon washers . Be
sure to connect the 24” CAT5 cable from the speedometer to the tachometer.
Bezel flush with housing
once fully seated in housing
and cable properly routed
Mounting
screws
WRONG!!!!
Cable will get
pinched by the
pull block
Foam tape
Cable routed through
indicator light opening