Manual # 650648
2. Remove each of the three (3) factory gauge bezels and mount them to the VHX system using the
four (4) original screws per gauge.
4. With the provided CAT5 cables, attach one end of the provided 36” CAT5 cables to both the back of
the VHX system speed and the back of the tach gauge with the other ends carefully routed to the
control box mounting location. One end of the 12” CAT5 cable goes to the speed and the other end
to the quad.
To Control Box
To Control Box
tach
speed
quad
3. Mount the VHX system to the stock dash using the stock screws from disassembly.
tach
speed
quad
