background image

Manual # 650487B 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.   Remove the stock gauges, separator plate, and lenses from the bezels. For the main cluster, 

reattach the lens spacer to the bezel after removing the lens as shown (white arrows).  The only 
items to be reused are the original front bezels and gauge mounting hardware. Now is a good time 
to clean or refinish the bezels.   

3A.  The Speedometer and Tachometer are interchangeable side to side. Choose the orientation you 

prefer, then place the Speed and Tach on the main lens spacers and secure the gauges with the 
six (6) stock mounting screws. Use two (2) stock mounting screws to attach the ABS plastic 
brackets to the bezel and thumb screws to secure the brackets to the VHX gauges.

 

 

3B.  Dashes with the vent by the driver’s right knee 

will use the extended ABS bracket for proper 
Mounting.

 

 

Содержание VHX-68C-VTA

Страница 1: ...ation Control Box 2 ABS Mounting Brackets 2 Thumb Nuts 1 60 CAT5 Cable 1 36 CAT5 Cable 1 12 CAT5 Cable Universal Sender Pack Installation Manuals VHX Displays 1 Remove the stock gauge clusters from the dash and save all hardware for reassembly 3 Block Off Lenses Clock Power Harness Extended ABS Mounting Bracket Washer Switch Assembly ...

Страница 2: ...me to clean or refinish the bezels 3A The Speedometer and Tachometer are interchangeable side to side Choose the orientation you prefer then place the Speed and Tach on the main lens spacers and secure the gauges with the six 6 stock mounting screws Use two 2 stock mounting screws to attach the ABS plastic brackets to the bezel and thumb screws to secure the brackets to the VHX gauges 3B Dashes wi...

Страница 3: ...cable to the Tachometer and the other end to either port on the Speedometer connecting the two halves With the 36 CAT5 cable connect one end to the open port on the Speedometer and as the assembled cluster is installed into the dash carefully route the other end of the cable to the control box mounting location 636234 B 636243 A 636234 C 636234 B 1977 Style 1968 76 Style 6 With the block off lens ...

Страница 4: ...For more information go to www P65Warnings ca gov 8 The clusters are now ready to re install into the vehicle using stock hardware Refer to the main manual for wiring instructions to complete the VHX installation 7 Attach the provided 60 CAT5 cable and the clock constant power harness to the back of the VHX display Carefully route the other ends to the control box mounting location ...

Отзывы: