MAN #650776
12
OIL PSI Engine oil temperature setup menu
Only valid when optional SEN-1039 pressure sender is purchased from Dakota Digital.
When >OIL PSI
is displayed, and release.
The
To enable oil PSI, move focus t
press and hold the switch
, and release.
The selections will be
WARNING
BACK
Press and release the switch to change the selection, press and hold the switch to select it.
Low warning Low oil pressure warning setup
When >
, and release.
The low pressure options will range from 0 to 30 PSI.
Press and release the switch to change the change the low oil pressure warning point.
To exit, press and h
, and release.
TEST Voltage test
When >TEST
, and release.
The display will give a voltage return from the sender with 0.5 volts at zero PSI.
0.0 volts means the sensor is not connected.
To exit, press
, and release.
Exit setup.
DISPLAYS Message display option menu
Refer to graphic on
page 7
for indicator and message locations.
When >DISPLAYS
, and release.
LEFT
LEFT
CENTER , RIGHT TOP , RIGHT BTM , MBMs
BACK .
Press and release the switch to change the selection,
, and release.
LEFT TOP message screen information
When >LEFT
press and hold the switch until
is displayed, and release.
The selectable options are
,
.
Push and release the switch to select the option,
, and release.
PERFORM HIDE: does not allow any performance option displays to be show while riding.
PERFORM SHOW: turns on the following options, which can toggled through while riding.
o
HIGH Speed (MPH km/h), 0-60 time, ¼ mile speed with ¼ mile time, and HIGH RPM.
Press and release the switch to change the change the option.
Press
, and release.
LEFT BTM message screen information
When >LEFT BTM
displayed, press and hold the switch
, and release.
The selectable options are PE
,
.
Push and release the switch to select the option,
, and release.
PERFORM HIDE: does not allow any performance option displays to be show while riding.
PERFORM SHOW: turns on the following options, which can be toggled through while riding.
o
HIGH Speed (MPH km/h), 0-60 time, ¼ mile speed with ¼ mile time, and HIGH RPM.
Press and release the switch to change the change the option.
Press and hold the swit
, and release.
CENTER message screen information
When >CENTER
press and hold the switch
splayed, and release.
The selectable options are SPEED , TACH , GEAR
.
Press and release the switch to change the change the option.
Press
, and release.
RIGHT TOP message screen information
When >RIGHT TOP
press and hold the switch until
, and release.
The selectable options are
,
.
Push and release the switch to select the option,
, and release.
PERFORM HIDE: does not allow any performance option displays to be show while riding.
PERFORM SHOW: turns on the following options, which can toggled through while riding.
o
HIGH Speed (MPH km/h), 0-60 time, ¼ mile speed with ¼ mile time, and HIGH RPM.
Press and release the switch to change the change the option.
Press and hold the s
, and release.
RIGHT BTM message screen information
When >RIGHT BTM
press and hold the switch
, and release.
The selectable options are
,
.
Push and release the switch to select the option,
, and release.
PERFORM HIDE: does not allow any performance option displays to be show while riding.
PERFORM SHOW: turns on the following options, which can be toggled through while riding.
o
HIGH Speed (MPH km/h), 0-60 time, ¼ mile speed with ¼ mile time, and HIGH RPM.
Press and release the switch to change the change the option.
Press
, and release.
