5
MAN# 650666:A
SETUP MENU
*To simplify the setup procedure,
please download our IOS or Android app ‘Dakota Digital Motorcycle’*
The function switch is used to enter setup mode. To get into setup, press and hold the function switch while turning the
key on. Press and release the switch to advance through the menus below, press and hold to enter each menu.
Main Menu
Sub Menu
Description
BLUETOOTH
STATUS CHECK
Bluetooth ID and current connection status
OFF
Disable Bluetooth connections
SETUP ONLY
Allow Bluetooth connections only while in setup
ALWAYS ON
Allow Bluetooth connections when key is on
LIGHTING COLOR
COLOR THEMES
Set factory defined color themes
SET ALL COLOR
Set all areas to one color
DISPLAY COLOR
Set speed digit color
LABEL COLOR
Set speed label color
MESSAGE COLOR
Set message location 1 and 2 color
BAR COLOR
Set tach/fuel bar color
WARNING COLOR
Set tach high warning color
DIMMING
Set dimming method
SUNLIGHT
Set sunlight brightness method
RESET
Returns all colors and settings to factory default
SPEED
ADJUST
Adjust speed reading up or down while riding
AUTO
Drive one mile (or km) to calibrate speed
UNIT
Select MPH or km/h unit
SERVICE RESET
Set miles to service reset value or turn off
ODO PRESET
Odometer preset (
Can only be set within the first 100 miles)
TACH
INPUT
Set cylinder count and input type
HIGH WARNING
Set high RPM warning point
TEMP
UNIT
Set temperature unit
for use with MBM-17
VOLT
LOW WARNING
Set low warning point (default warning limit is 11.0V)
DISPLAYS
TOP MESSAGE
Show/hide performance readings in Speed Top Message location
BTM MESSAGE
Show/hide performance readings in Speed Bottom Message location
MBMS
Show connected MBM’s and set warning points
GEAR
PRESET
Turn gear display off (factory reset)
LEARN
Learn gears based on speed and RPM
FACTORY RESET
Resets all settings except odometer to factory defaults
VERSION
Displays software codes of each controller
EXIT SETUP
Exit
