Two additional wires will need to be passed through each door, along with the other power
window wires. This should be done using a flexible rubber tube or rubber grommet to protect the
wires, or by using the optional
DAKOTA DIGITAL, INC. MAGNUM SHOOTERS. MAGNUM
SHOOTERS
will eliminate the wires running through the door jambs entirely for the cleanest
appearance possible. When these highly conductive brass contacts are mounted to the door and
to the door jamb they eliminate the wires completely. If you would like to use MAGNUM
SHOOTERS they can be ordered directly from DAKOTA DIGITAL, INC. by calling toll free 1-800-
852-3228.
Using either the flexible rubber tube, or MAGNUM SHOOTERS, route the remaining
wires under the dash for the best location and appearance.
WIRING DIAGRAMS
3
Fused 12V power.
Do not
connect.
Fused 12V power.
To solenoid or other device.
Wiring a relay to one of the channel outputs
87
BLACK
BLUE
86
85
30
GREEN
RED
WHITE
To CMD-2000 channel output.
Using a dual relay pack to operate solenoids or door actuators.
The blue wire can be used for one channel and the green wire for another channel.
FUSED 12V POWER
To solenoid or door actuator.
To solenoid or door actuator.
Do not connect.
Fused 12V power.
PURPLE
GREEN
BROWN
WHITE
BLUE
RELAY
RED
small wire
GREEN
PACK
BLUE
small wire
DUAL
To CMD-2000
Channel output.
To CMD-2000
Channel output.
