Dakota Digital BIM-01-2-J1939, Руководство пользователя

Страница: 7 / 12

[7] MAN #650695
BIM setup:
BIM menu table:
Menu Options Default Notes
   
   
Enable air fuel ratio reading
   
   
   
Enable fuel pressure reading
   
   
   
   
Enable boost reading
   
   
   
Gauge will display MAP/vacuum reading *** Terminator X cannot read MAP
   
Gauge will display boost
   
   
Check engine light sent by ECU
   
   
View the current BIM ID numbers
   
Automatically set bus ID numbers
   
Exit Setup
Enable or disable engine indicator status from the BIM-01-2-J1939
•
Hold the switch on the BIM-01-2-J1939 case while turning the key on. The BIM display will show the current
revision code while this is held.
•
Release the switch.
•
Press and release the switch until the display shows

(engine). Press and hold to enter this menu.
•
When you see

on the display release the switch.
•
The display will show the current state or the engine indicator enable

(enable) or

(disable).
•
Press and release the switch to change the state.
•
To save setting press and hold the switch until you see

on the display then release the switch.
•
The display will display the next available menu. Press and hold the switch to enter that menu or press and
release the switch to select another menu.
•
To exit, press and release the switch until the display shows

then press and hold the switch until you see

on the display.
Enabling Boost:
The BIM-01-2-J1939 has an option to enable boost readings if the car has turbocharger.
•
Hold the switch on the BIM-01-2-J1939 case while turning the key on. The BIM display will show the current
revision code while this is held.
•
Release the switch.
•
Tap the switch until the display shows

(boost). Press and hold to enter this menu.
•
When you see

on the display release the switch.
•
The display will show the current boost state,

(disable) or

(enable).
•
Tap the switch to change the state.
•
To save setting press and hold the switch until you see

on the display, then release the switch.
•
The display will show

. Press and hold the switch to exit setup or tap to choose another menu option.