{
{
4
3
figure 3
Switch
9
Switch
10
Channel
Tune
On
On
1
Classical
Off
On
2
Westminster
On
Off
3
Ding Dong
Off
Off
4
Whistle
2. Locate the 10 dip switches on the transmitter module (figure 3).
3. The first eight dip switches are for the frequency setting (256 combinations). Set
switches 1-8 (figure 3-3) to match the eight switches in the receiver.
4. Switches 9 and 10 (figure 3-4) are for zone/channel setting on the transmitter.
The four zones are listed below.
Low battery alert: If the receiver sounds a second alert 30 seconds after the first alert, provided
nothing trips the transmitter again, the 9-volt battery in the transmitter should be changed.
4.
