Dakota Alert DCMT-4000, Руководство пользователя

Страница: 8 / 12

8
5. If you are coding more than one transmitter, repeat steps 3 and 4.
6. After your transmitter(s) are coded, press and hold the MODE button until the LEDs stop
flashing.
7. To test the tune, activate the motion detector. You’ll hear the selected tune through your
receiver and the lights will flash.
MOUNTING YOUR MOTION DETECTOR
Note: For the maximum range between the motion detector and receiver, mount the motion detector on
a wooden post or tree (steel posts may interfere with the signal). Although the maximum range is about ½
mile, obstructions such as hills, trees, metal siding and stucco can reduce that range.
1. Select a location to mount the motion detector. For the best results:
» Mount the motion detector to a wooden post or tree (steel posts may interfere with the
signal).
» Place 3-4 feet off the ground and about 20 feet from the side of the drive.
» The motion detector will detect people or vehicles to about 100 hundred feet, but
occasionally it may detect much farther. For this reason, avoid pointing the transmitter at
roads in the distance.
» Keep the motion detector completely immobile to prevent false signals. Avoid mounting
the transmitter on flimsy objects or small-diameter trees that may move in the wind.
2. Select a mounting bracket.
» The plate mount is ideal for outdoor applications such as trees and posts.
» The swivel mount is for indoor applications such as pointing towards doorways,
windows, or any time more adjustment is needed for the transmitter position.