4
CODING YOUR RECEIVER
Note:
You can connect up to 16 transmitters to your receiver.
1. Place your receiver and the break beam transmitter near each other.
Note:
Sensor unit A contains the radio transmitter.
2. Press and hold the
MODE
and
(volume) buttons for three seconds. When all four lights
fl ash, release the buttons.
3. Press (volume) repeatedly until you fi nd the tune you want to use.
1
Ding Dong (high)
5
Alarm/Siren
9
William Tell
2
Ding Dong (low)
6
Coo Coo Clock
10 Canon in D
3
Westminster
7
Bird Chirping
11 Morning
4
Fur Elise
8
Twinkle Twinkle
12 Toreador March
4. After you choose a tune, block a sensor’s IR windows to activate the transmitter. The receiver
emits a short beep.
5. If you are coding more than one transmitter, repeat steps 3 and 4.
6. After your transmitter(s) are coded, press and hold the
MODE
button until the LEDs stop
fl ashing.
7. To test the tune, block a sensor’s IR windows. You’ll hear the selected tune through your
receiver and the lights will fl ash.
Block a sensor’s IR windows with
cardboard or other solid object
MOUNT
Before you
• The
re
small a
• The
se
• Moun
the be
Circular p
1. Attach
bolts.
2. Attach
and fo
3. Moun
and fo
windo
Note:
I
4. Moun
M5 × 2
windo
Note:
W
M5 ×
U-sh
BBT-4000_19-0041_MAN.indd 4
BBT-4000_19-0041_MAN.indd 4
2/4/2019 9:47:07 AM
2/4/2019 9:47:07 AM
