TROUBLESHOOTING:
If sensor pair alerts when originally paired, but will not alert when mounted...
1. Push power button on unit ‘A’
2. Look in center hole for the indicator light. If light is on, proceed to step 3. If light is not on, press power
button again. Indicator light should come on.
3. Repeat steps 1 and 2 for unit ‘B’. This will re-sync the units.
If experiencing false alerts...
• Check for obstruction (i.e. branch, frost)
• Extreme fog
• Extreme snow and rain
• If obstruction/weather are not involved, try changing the frequency of the DCR-2500 and unit ‘A’
• If unit is blocked continually a second signal will be generated after one hour
If no signal...
• Turn power off on all units for 60 seconds and then turn power back on
• Make sure units are still aligned
• Make sure all 8 dip switches in DCR-2500 match the first 8 dip switches inside unit ‘A’
TECHNICAL SUPPORT:
If you encounter any difficulty in the operation of this product after reading the manual, please contact us.
We will be happy to answer your questions and help you in any way we can.
WARRANTY:
Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one
year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of
God or improper operation. If this product does become defective, simply return it to Target Technology Ltd.
Please include a note describing the troubles along with your name and return address as well as the original
sales receipt. If the product is covered under warranty it will be repaired or replaced at no charge. If it is not
covered by warranty, you will be notified of any charges before work is done.
