12
13
How to change the back-up battery:
Important: It is recommended to check the back-up battery at least once a year, even if the
battery is not low.
1. First make sure that the Auto Dialer is OFF. Then release it from the wall.
2. Remove the battery door and take out the old battery. Insert new 9V battery and make
sure it is in the correct polarity.
3. Fit the battery door and mount the Auto Dialer back onto the wall.
HOw TO ReSeT THe AUTO DIAleR
Inside the battery compartment:
Remove the power supply and the Auto Dialer from the wall. Remove the 9V battery. Inside
the battery compartment is a switch. Move it to the ERASE position. Connect the power to
the Auto Dialer then press DELETE twice. There will be 2 short beeps from the Auto Dialer.
Switch the power off again. Place switch back to NORMAL. Replace the 9V battery and
place back onto the wall. Power the Auto Dialer back up. The Auto Dialer will then return to
factory default setting.
AD-01 Kit Manual.indd 12
10/15/2009 10:17:56 AM
