Dake SE-5X6 RCT, Инструкция по эксплуатации

Страница: 8 / 20

8
1.11 MACHINE DESCRIPTION
The bandsaw is made up of two main parts: the machine body (5) complete with
motor and drive system (7) which is joined, by means of a swivel support (9), to the
bottom section, made
up of a base (13) and vise (11).
2. INSTALLATION
2.1. CONTENTS OF THE PACKAGING
• 1 bandsaw / handles and hardware
• 1 Stock stop assembly
• User Manual
2.2. REMOVING THE PACKAGING
Remove the box used to protect the machine during transport.
It is advisable to keep the packaging for future use (for transporting or storing the
machine).
2.3. SAW HANDLING
a) Install the handles (3).
b) Lift the machine only with these handles
2.6 POSITIONING WORK STATION
Position the machine on a work bench or on a pedestal at a height of between
35”–
37” from the ground. The surface on which the machine is placed must be big
enough to guarantee machine stability
2.7 DANGER-WARNING AUTONOMOUS CUTTING SAWS
This model of machine (SE-5X6 RCT) must only be used in a dedicated work area to
which unauthorized access is prohibited.
If no such work area is available, it is advisable to cordon off the machine's operating
area (6’ of clearance on all sides of the bandsaw)
Position the machine in a work area with adequate lighting.
It is advisable to secure the machine to the workbench with M6 screws using the
holes provided on the base.
2.8 ELECTRICAL CONNECTION
Safety Standards for electrical connections
- Check that the electric supply system to which the machine is to be connected is
grounded in accordance with the relative safety regulations in force.
DANGER - WARNING
CHECK THAT THE POWER SUPPLY SYSTEM IS EQUIPPED WITH A
CIRCUIT BREAKER TO PROTECT ALL CONDUCTORS FROM SHORT CIRCUIT
AND OVERLOADS
DANGER - WARNING
- BEFORE CONNECTING THE MACHINE TO THE ELECTRICAL SYSTEM,
CHECK THAT THE MAINS VOLTAGE MATCHES THE VOLTAGE INDICATED ON
THE MACHINE ITSELF.
- ONCE CONNECTED, TO AVOID ANY POSSIBLE RESIDUAL RISKS OF
TRIPPING AND FALLING, MAKE SURE THAT THE POWER SUPPLY CABLE