Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
983112-2
6
REV112019
SAFETY WARNINGS
WARNING: FAILURE TO FAOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
As will all machinery there are certain hazards involved with operation and use of the machine.
Using the machine with respect and caution will considerably lessen the possibility or personal
injury. However, if normal safety precautions are overlooked or ignored, personal injury to the
operator may result.
This machine was designed for certain applications only. We strongly recommend that this
machine NOT be modified and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the machine until you contact
with us and we have advised, you.
Your machine might not come with a power socket or plug. Before using this machine,
please ask your local electrician to install the socket or plug on the power cable end.
SAFETY RULES FOR ALL TOOLS
USER:
•
Wear proper apparel: No loose clothing, gloves, rings, bracelets, or other jewelry to get
caught in moving parts. Non-slip foot wear is recommended. Wear protective hair
covering to contain long hair.
•
Always wear eye protection. Refer to ANSLZ87.1 standard for appropriate
recommendations. Also use face or dust mask if cutting operation is dusty.
•
Do not overreach. Keep proper footing and balance at all times.
•
Never stand on the machine. Serious injury could occur if the machine is tipped or if the
cutting blade is accidentally contacted.
•
Never leave the saw running unattended. Turn off power. Don't leave saw until it comes
to a complete stop.
•
Do not operate the tool while under the influence of drugs, alcohol, or any medication.
•
Make sure the saw is disconnected from power supply while motor is being mounted,
connected, or reconnected.
•
Always keep hands and fingers away from table.
•
Stop the machine before removing any chips or debris.
•
Shut off power and clean the band saw and work area before leaving machine.
