Dake SB-250V, Руководство пользователя

Страница: 12 / 23

10
SPINDLE DEPTH AND FEED OPERATION
Depth setting
Loosen the depth locking handle by turning it counter clockwise. When this is loose
you can turn the depth gauge to the desired depth.
Zigzag line is for auto feed depth operations
Straight line is for manual depth feed operations
After setting depth tighten the depth locking handle.
Manual feed operation
With the spindle in operation and the feed handle in the manual feed position pull
the feed handle down making contact with the work material.
Auto feed operation
With the spindle in operation, pull the feed handle out away from the drill press as
shown above (auto feed handle position). The spindle will begin to feed down. The
faster the spindle rotates the faster the spindle will feed down. The slower the
spindle rotates the slower the feed rate. If you want to stop the feed down
movement move the feed handle to the manual position and the spindle will go back
up to the starting position.
DEPTH LOCKING HANDLE
MANUAL FEED HANDLE POSITION
AUTO FEED HANDLE POSITION
ZERO POINTS
DEPTH LOCKING GAUGE