Dake SB-250V, Руководство пользователя

Страница: 10 / 23

8
Note:
•
Always use sharp, straight bits.
•
Never use bits with turned down
shafts.
•
Never exceed the maximum diameter
bit size for the machine.
•
Always wear appropriate clothing
while operating the drill press.
•
All guards and interlocks must be in
place when operating the machine.
Correct: Jaws Incorrect: Jaws
contact drill shaft contact drill flutes
Wedge removal tool
Tooling removal:
Before removing the chuck or bit from the
machine; be sure the spindle has come to
a complete stop and power is off. If needed,
rotate spindle by hand to align the spindle
and quill openings. Insert the wedge
removal tool, while supporting the tooling,
and tap the wedge to remove the tooling.
Work holding:
When drilling directly on table surface, it is recommended that a
piece of wood or plywood be clamped securely to table under the
work piece. This will minimize splintering or burring as the drill breaks
through. It will help minimize drill bit and table damage.
Clamp the work piece to the table whenever possible. The table has
“T” slots that allow for many different clamping configurations.
When part cannot be affixed to the table a drill vise that is bolted in
place is recommended.