DAK 900-EH Series, Руководство пользователя

Страница: 22 / 33

__________________________________________________________________________________ 22
Measuring the density of liquid.
Assumed that all mechanical arrangements are with respect to the liquid mode:
1. Select LIQUID MODE by keeping the A Key pressed while pressing B along with “A” till you reach the
required mode
2. Place the GLASS REFERENCE in the sample liquid and press OK.
3. Liquid density is calculated based on the memorized data of the GLASS REFERENCE and the weight of
REFERENCE weight in the sample liquid.
4. Press OK, the data is sent to printer and PC.
PREPARATION 2 - Replace the Sensor to the Liquid Density Kit.
Step 4
1. Turn OFF the POWER.
2. Put off the Sensor & the Water Tank.
•
Do not spill the water.
3. Attach the Beaker Stage On The Holder.
•
Face up the Beaker Line.
4. Put the hanger along the bulge on the Support. Turn ON the POWER & make the display is 0.00g. Set up is
completed.
•
If the display does not show 0.00g, do calibration on the support (See Page17)
BEAKER STAGE
Step1 Step 2 Step 3