4
SAFETY WARNINGS & INSTRUCTIONS: BATTERIES
SAFETY WARNINGS & INSTRUCTIONS: CHARGING
• This manual contains important safety and operating instructions.
• Before using battery charger, read all instructions and cautionary warnings on
battery charger and product using battery.
• Do not expose charger to rain or snow.
• Use of an attachment not recommended or sold by manufacturer may result in a risk
of fire, electric shock, or injury to persons.
• To reduce risk of damage to electric plug and cord, pull by plug rather than cord
when disconnecting charger.
• Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
• An extension cord should not be used. Use of improper extension cord could result
in a risk of fire, electric shock or electrocution.
• Use only the supplied charger when charging your massager. The use of any other
charger could damage the massager and create a hazardous conditions.
• Do not attempt to open the charger. There are no customer serviceable parts inside.
Return to any authorized service center.
• DO NOT incinerate the massager, since it contains batteries. Even if it is severely
damaged or completely worn out, the batteries can explode in a fire. Toxic fumes
and materials are created with lithium ion battery packs are burned.
• Do not charge or use battery in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
• If battery contents come into contact with the skin, immediately wash area with mild
soap and water. If battery liquid gets into the eye, rinse water over the open eye for
three minutes or until irritation ceases. If medical attention is needed, the battery
electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
SAVE THESE INSTRUCTIONS
• Do not disassemble or open, drop (mechanical abuse), crush, bend or deform,
puncture, or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, or expose to fire, excessive heat
including soldering irons, or put in microwave oven.
• Only use the battery / tool with a charging system specified by the manufacturer/
supplier.
