118
The control panel supervises and identifies the relay. It monitors the state of:
• the
power supply
,
• the
radio link
,
• the
anti-tamper contact
.
If a fault has been memorised, the control panel issues a voice message to indicate the fault
following a system command e.g. ON/OFF (see control panel user manual).
The
power fault
is also indicated locally by the relay as it issues
3 short beeps
.
Example:
if the relay/control panel radio
link is lost, the control panel issues the
voice message:
8. Maintenance
8.1 Fault indications
To change the battery:
8.2 Changing the battery
“beep, partially arm one,
beep, fault, radio link, device X”
1.
Switch the system to installation mode using the control panel to enter:
then
master code
installer code
“beep, test
mode”
“beep,
installation
mode”
“beep, test mode”
“beep, installation
mode”
2.
Loosen the 4 cover screws
and open the relay.
