GB
12
IMPORTANT
• To retrieve image sequences via the Bluetooth
®
link, the mobile phone
must be fitted with this technology.
• IPhone model cannot be used for this function because its Bluetooth
®
function is not compatible.
The red LED on the detector flashes quickly for 90 seconds to indicate a
new sequence of recorded images. This indication is repeated 10 times in
a row with each detection.
The sequences can be retrieved in two ways:
• using the Bluetooth
®
feature on a mobile phone,
• by inserting the microSD card into a computer drive.
1. Using the Bluetooth
®
feature on a mobile phone
1.
Disarm the control panel.
2.
Create a new contact (do this only once) called
img-det-daitem
(use
the same syntax) in the phone directory without associating it with a
telephone number.
3.
Activate the telephone’s Bluetooth
®
application (refer to manual).
4.
Search for Bluetooth
®
devices near the telephone.
5.
Select the detector called
DET_IMG xxxxxx
(xxxxxx corresponds to
the detector identifier).
6.
Enter the “0000” code to associate the detector.
7.
Send the
img-det-daitem
contact via Bluetooth
®
to the detector. The
detector automatically sends back the recorded images to the phone.
8.
Check the recorded images using the phone’s image or photo folder.
9.
If you wish, you can deactivate the phone’s Bluetooth
®
feature.
Example with a “Samsung PlayerOne” phone: :
1.
Go to the telephone directory and create the new contact
img-det-daitem
making sure you reproduce the exact syntax. Do not
associate it with a telephone number.
2.
Select this contact then press on the “Plus” menu.
3.
Press “Send contact information” then select “Bluetooth
®
”. The
telephone’s Bluetooth
®
feature is automatically displayed. The logo
automatically appears at the top of the telephone.
