+
+
3
1
Connect the red wire (+) of the Tetra Stick to the red wire (+) of the power supply. Connect the black wire (-) of the Tetra Stick
to the black or blue wire (-) of the power supply. Seal all connections that could be exposed to water with electrical grade
RTV silicone
Electrical Connections
Single Tetra Stick Installation
Power Supply
Add up total number of Tetra Sticks to determine the
appropriate number of 24VDC Class 2 Tetra LED drivers
to use based on the Specifications Charts for Tetra
Stick chosen (see pages 4-5).
1
Mutiple Tetra Stick Installation
Connect the red wire (+) of the Tetra Stick to the red
wire (+) of the power supply. Connect the black wire (-)
of the Tetra Stick to the black or blue wire (-) of the
power supply.
2
AC line
GEPS24-180
3
Connect Tetra Stick using twist-on wire connectors or in-line (IDC) connectors. Join black wires together and red wires
together. Seal all connections that could be exposed to water with electrical grade RTV silicone.
NOTE: Make sure not to exceed LED driver power limits (see Step 1). Drawing above is for reference only; your lighting
layout may differ.
NOTE: All drivers except GEPS24-180U and GEPS24-300U must be enclosed or provided with a GEPSJB60 LED driver
extended enclosure.
NOTE: Refer to Power Supply Installation Guide for AC driver installation.
Power supply
To Tetra Sticks
Red (+)
Red (+)
Black (-)
Black or blue (-)
Power supply
To Tetra Sticks
Red (+)
Red (+)
Black (-)
Black or blue (-)
