Installation Guide
Daintree
®
Wireless
High Bay Sensor
(WHS100)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and radiates radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encourage to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna;
•
Increase the separation between the equipment and receiver;
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
•
Consult the dealer or an experienced radio/TV technician
for help.
Product complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation
or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be
referred to GE Current, a Daintree company.
Questions:
Web:
products.gecurrent.com
Phone:
1-866-855-8629
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without notice.
All values are design or typical values when measured under laboratory conditions.
DT109 (Rev. 03/29/2021
Input Power
120-277 VAC 50/60Hz
Load Rating
5A @ 120-277VAC
Load Types
General Use, Electronic Ballast
Ballast/Driver
Control: On/Off, 0-10V Dimming
Dimming Output
0-10V; 15mA (max sink)
Indicators
Green LED (motion detection)
Red LED (off for normal operation)
Motion Sensor
PIR technology
Power Measurement
2% accuracy (0.04~5A range)
Power Consumption
0.32W @120VAC, 0.58W @277VAC
Dimensions (w/out
3.54” L x 3.54” W x 1.78” H
mounting)
(90mm L x 90mm W x 45.4mm H)
Radio Properties
2.4 GHz, +8dBm transmit power
Technology
Wireless: ZigBee PRO (HA, BA)
Lenses Included
360° lenses (8ft, 20ft, 40ft), Aisle
Mask
Off-Delay Timer
Configurable in CSM
Operating Environment
-40°F to +158°F (-40°C to +70°C)
5-95% RH, non-condensing,
Indoor/Outdoor
Enclosure
Watertight; IP66 rated*
Mounting
Standard ½” knockout mount
Compliance
FCC Part 15, FCC ID: Z6G-DT357 CAN
ICES-3 (B)/NMB-3(B), IC: 10478A-
DT357 UL Listed
Specifications
FCC Warning Message
Industry Canada (IC) Warning Message
CAUTION
RISK OF EXPOSURE IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSAL OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
WHS100
18
19
