Installation Guide
Daintree
®
Networked Wireless Adapter (WA100-PM)
16
15
Plug load control functionality for the WA100-PM is made
available with WA100-PM firmware provided in version 3.5.3.1.
During testing the Plug Load cycles on/off in sync with the
lighting load. Relays used to control plug loads must be
compliant with UL498 (Attachment Plug and Receptacles)
or equivalent.
Wiring for Combination Plug Load
(Basic Aux Relay) and Dimming Light
In the wiring diagram below, the WA100-PM is used to
control both a dimming light and a plug load circuit.
Wiring for Combination Plug Load (Basic Aux Relay)
and On/Off Light
In the wiring diagram below, the WA100-PM is used to control
both an On/Off light and a plug load circuit.
Plug Load Applications
OFF
ON
Perform Installation Test Suite 1
DIP Switches
Driver: On/Off +
0-10V dimming.
Plug Load:
On/Off
Wired Sensor:
None
On
1 2 3 4 5 6
(#2,3 On)
Perform Installation Test Suite 1
DIP Switches
Driver:
On/Off
Plug Load:
On/Off
Wired Sensor:
None
On
1 2 3 4 5 6
(#2,4 On)
OFF
ON
* 0-10V Dimming output, 5 mA available, Up to 10 LED drivers or
fluorescent ballasts typical; the chance of noise on the signal
increases with more.
** Relays used to control plug loads must be compliant with UL498
(Attachment Plug and Receptacles) or equivalant.
