Daimler Freightliner Cascadia 2021, Руководство пользователя

Страница: 64 / 322

Lighting
The lighting menu provides controls for a set of inte-
rior and exterior lights using the touch screen.
Exterior lighting
The exterior lighting screen presents an image of the
front of a New Cascadia vehicle showing lights and
digital switches for those lights. Touching a switch
lights up the switch, activates the lights on the image
of the truck, and turns on that light on the truck itself;
touching the switch again turns all these lights off.
Touching the intelligent high-beam headlights control
at the bottom of the screen will change its status. For
this switch the status of On is indicated by a lighted
bar at the top of the icon.
When intelligent high-beam headlights are on, the
high-beam headlights will switch to low-beam head-
lights when a vehicle approaches from the opposite
direction. They will switch back to high-beam head-
lights when no vehicles are approaching from the
opposite direction.
The intelligent headlights can also be controlled by
using the headlight switch and turn signal lever; see
Chapter 4 Driver Controls for more information.
Touching the courtesy lighting icon will open a popup
showing the current lighting duration and allowing the
lighting duration to be adjusted.
Exterior lighting controlled by the rotary dial cannot
be controlled through the exterior light screen.
If the fog lamp is turned on via the rotary dial, the fog
lamp on the truck graphic will be shown as on.
Interior Lighting
The interior lighting menu shows an image of an inte-
rior of a New Cascadia truck. The digital switches for
interior lighting allow for the control of overhead, foot
well, and sleeper lights.
Touching any of the light icons on the screen will
lights up the digital switch, activate the lights on the
interior image of the truck, and turn on those lights in
the truck itself.
All interior lights can be dimmed using the slider next
to the light icon.
All available lights in the cab can be turned off and
on by touching the Off button.
Entrance lighting can be controlled by the settings
icon. Touching the settings icon will open a popup
window where the entrance lighting can be toggled
off or on and entrance light timing controls can be
accessed. Choosing entrance light timing will be
open a slider that allows modification of the length of
time the entrance light is on.
All sleeper lights can be dimmed using the slider
next to the light icon.
Climate Control Information
NOTE: See Chapter 8 Climate Controls for de-
tailed climate control panel operating
instructions.
On vehicles equipped with the ICC5, climate control
information will briefly appear on the B-panel display
when physical climate controls are adjusted. The fol-
lowing controls should cause the climate bar to ap-
pear: recirculation settings, fan speed, air condition-
ing status, temperature setting, and blower selection.
If the cab is equipped with a sleeper and the sleeper
override button is pressed, the sleeper override icon
will also appear in the climate bar. In addition,
changes to the climate control of the sleeper area
will appear in a pop-up message.
Infotainment: ICC5
General ICC5 Infotainment
Information
Information and controls available on the ICC5 info-
tainment (B-panel) display:
•
Shortcut icons, statusline, and climate bar
•
Gauges
•
Cab
•
Chassis
•
Lighting
•
Navigation
•
Phone
•
Radio
•
Media
•
Smartphone
System Settings
Select the gear icon to open the Settings menu. Set-
tings is also available within the Cab menu.
Instruments
3.41