Daikin WGZ030DW, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 80

Dimensions and Weights - Packaged Units
www.DaikinApplied.com 21 IOM 1322-1 • WATER-COOLED SCROLL COMPRESSOR
Figure 16: Lifting Locations, WGZ150-200D Packaged
Table 7: Lifting Weights, WGZ150-200D Packaged
NOTE: Refer to “Moving the Unit” on page 7 for details on transferring/lifting the unit. Do not lift unit by mounting holes in
feet.
Isolator Information
It is recommended that isolators be used on all upper level
installations or in areas where vibration transmission is a
consideration. Transfer the unit as indicated under Moving the
Unit. “ In all cases, set the unit in place and level. When spring-
type isolators are required, install springs running under the
main unit supports.
The unit should be set initially on shims or blocks at the listed
spring free height. When all piping, wiring, flushing, charging,
etc., is completed, the springs are adjusted upward to loosen
the blocks or shims that are then removed.
A rubber anti-skid pad should be used under isolators if
holddown bolts are not used.
Installation of spring isolators requires flexible piping
connections and at least three feet of flexible electrical conduit
to avoid straining piping and transmitting vibration and noise.
Refer to unit dimension drawing for mounting locations.
Figure 17: Isolator Locations
Table 8: WGZ-DW Isolator Kit Part Numbers
Model Number 030-060 070-080 90 100-130 150-200
Spring-Flex 332320501 332320502 332320503 332320504 332320505
R -I-S 332325501 332325502 332325502 332325503 332325503