Daikin VAM-J8 Series, Инструкция по установке и эксплуатации

Страница: 6 / 32

4 User interface
Installation and operation manual
6
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664011-1 – 2021.08
▪ Do NOT sit, climb or stand on the
unit.
▪ Units are marked with the following symbol:
This means that electrical and electronic products may NOT be
mixed with unsorted household waste. Do NOT try to dismantle
the system yourself: the dismantling of the system, treatment of
the refrigerant, of oil and of other parts MUST be done by an
authorised installer and MUST comply with applicable legislation.
Units MUST be treated at a specialised treatment facility for reuse,
recycling and recovery. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences
for the environment and human health. For more information,
contact your installer or local authority.
▪ Batteries are marked with the following symbol:
This means that the batteries may NOT be mixed with unsorted
household waste. If a chemical symbol is printed beneath the
symbol, this chemical symbol means that the battery contains a
heavy metal above a certain concentration.
Possible chemical symbols are: Pb: lead (>0.004%).
Waste batteries MUST be treated at a specialised treatment
facility for reuse. By ensuring waste batteries are disposed of
correctly, you will help to prevent potential negative consequences
for the environment and human health.
3.2 Instructions for safe operation
CAUTION
During operation, NEVER check or
clean the unit. It may cause electrical
shock. Do NOT touch the rotating
parts, it will cause injury.
CAUTION
This unit is equipped with electrically
powered safety measures that are
required when connected to an
EKVDX. In order to be effective, the
installed unit MUST be electrically
powered at all times, except for short
service periods.
CAUTION
Before accessing, make sure to turn
OFF the operation switch and
disconnect the power.
WARNING
Stop operation and shut OFF the
power if anything unusual occurs
(burning smells etc.).
Leaving the unit running under such
circumstances may cause breakage,
electrical shock or fire. Contact your
dealer.
4 User interface
This operation manual offers a non-exhaustive overview of the main
functions of the system.
Detailed information on required actions to achieve certain functions
can be found in the dedicated installation and operation manual of
the indoor unit.
Refer to the operation manual of the installed controller.
5 Maintenance and service
CAUTION
See "3 User safety instructions" [
4
5] to aknowledge all
related safety instructions.
NOTICE
Maintenance MUST be done by an authorised installer or
service agent.
We recommend performing maintenance at least once a
year. However, applicable legislation might require shorter
maintenance intervals.
NOTICE
We recommend to clean at least once every 2 years (for
general office use). If necessary, shorter maintenance
intervals might be required.
5.1 Maintenance of the air filter
NOTICE
▪ Do NOT wash the air filter in hot water.
▪ Do NOT dry the air filter over a fire.
▪ Do NOT subject the air filter to direct sunlight.
▪ Do NOT use organic solvents, such as gasoline or
thinner, on the air filter.
▪ Make sure to install the air filter after servicing (missing
air filter causes clogged heat exchange element).
Replacement air filters are available.
To clean the air filters
1 Go into the ceiling through the inspection hole, loosen the
screw of the hinge mechanism (on the left side) to open the
service cover. Take the service cover off by rotating it around
the vertical axis of the hanging metal.